This 7 Port Powered USB 3.2 Gen 2 Hub from intpw functions just as I expected. Within the USB Hub’s display box play box is the 7 Port USB 3.2 Gen 2 Hub, a 3.3' ft USB-A to USB-A cable, a 3.3’ ft USB-A to USB-C cable, a Power Adapter, and a user manual. The Instructions and Warnings are pretty simple, they state that this USB 3.2 Gen 2 Hub is Plug and Play, Supports USB 3.2 Gen 2 10Gbps data transfer speed on 4 of the 7 ports. 3 of the ports are dedicated to charging, with one of those USB ports being QC 3.0 capable and up to 18W. The other 2 USB, “INT-POWER” charging ports are Fast charge capable, up to 2.4A. Reading the user manual mentions that those 2 INT-POWER ports share that 2.4A, so it’s something to keep in mind. The only issue I had with this USB Hub is that both of the included cables are only a bit over 3’ long. This may not be much of an issue if using this USB Hub with a laptop, though for most desktop use, you’ll need a longer USB cable. I had some extra USB 3.2 cables around, so I was alright. The computer I hooked this USB Hub up to had no problems recognizing the device. I’ve plugged a keyboard, mouse, and some USB 3.0 and 3.1 memory sticks, and everything has performed as I expected. There is a small green LED color light on the front of the device to let you know when it is powered on, and it’s not shockingly bright, but subdued, which is a nice touch. Too often I encounter electronic devices that have super-bright LED power lights. So far, this 7 port USB 3.2 Gen 2 hub is functioning well and as expected. If anything changes, I’ll update this review.